Aliuminis bus tiltų medžiagų žvaigždė

Aluminum advantages highlight the advantages of aluminum bridge
The appearance of the beautiful and rich aesthetic shape, didelis atsparumas korozijai, in the entire life cycle does not need maintenance, can reduce the cost of reasonable cost and maintenance cost is much lower than that of steel bridge, combined with life cycle matures, aluminium scrap almost can recycle all, daugiau nei 95% of the performance can be obtained with the original quite recycled aluminum, aluminum and steel bridge expires recycling renewable steel is less than 70%…
Aluminum, as a bridge material, has a series of superior properties that are difficult to replace, and is considered as a new material with vitality and vitality.
A study in Canada in 2008 fully demonstrated this. Of the nine Bridges built between 1946 ir 1963, six are still being built.
The density of aluminum is low, so the bridge’s deadweight is lower than that of steel bridge and concrete bridge, which is conducive to manufacturing, transportation and installation. Tuo pačiu metu, the width of the bridge can be increased, and the supporting members can be reduced and reduced. This is especially important for the load limitation of the bridge and the restoration of historic Bridges.
Usually, aluminum bridge decks are 70 į 80 percent lighter than concrete and most other metal decks.
Pastaraisiais metais, the aluminum industry has made great progress in aluminum production, new alloy research and development and performance improvement, and large-section extruded material production, which has promoted the application of aluminum in bridge structures to a new level.
Matte group (MAADI, MostAdvancedAluminumDesign&Inspection) and alcan association (AluminumAssociationofCanada), according to a study by a use made of galvanized steel 3.24 metrų pločio, 28.6 meters long steel bridge, after 50 years the cost of 28% ~ 167% higher than aluminum bridge.
The study also showed that aluminum Bridges cost less over 33 years than galvanized steel Bridges.
This only compares the cost of the two materials in the general atmospheric environment. The corrosion resistance of aluminum is higher than that of steel under severe corrosion conditions. Šiuo metu, the advantage of aluminum bridge will be more prominent.
The advantages of aluminum are evident in the construction of pontoon and movable Bridges, as well as in the recent construction of road Bridges, such as the sardisfield bridge in west Massachusetts, JAV, which was built with extruded aluminum.
Į 2017, the consumption of extruded aluminum in Canada increased by 5% year on year, which has been in a growth trend for nine consecutive years. Thanks to the increase in the consumption of aluminum in buildings and structures, the consumption of extruded aluminum in Bridges is one of the factors.
The industry has been encouraged by the greater growth of aluminum in bridge construction in North America, especially as the success of Vehicularbridge construction has increased the use of structural extrusion aluminum in Bridges.
To meet this market demand, madi group has launched a system called GuarDeckR (high performance bridge panel R), which is made of extruded aluminum and can carry 15 tonų. In case of a bridge or road accident, it can be transported to the site, repaired in a short time, and traffic can be resumed.
Challenges of aging Bridges
Bridge system at present, North America has entered a critical state or approaching danger, 603000 in the United States and Canada more than 56000 of the highway bridge is the most in the construction of 50 ~ 70 s, most of which are already in or about to enter a defective fault period, the federal highway administration in the near future, according to data from the United States has about 56000 Bridges in structure is more or less problems;
Apie $123 billion is needed to repair and strengthen broken Bridges, according to a report published by the American society of civil engineers.
Repairing these Bridges, most of which are made of steel and concrete, and more recent ones made of reinforced concrete, will significantly increase the cost of their infrastructure over the next 20 metų.
Investing in the construction of Bridges, roads and other transportation facilities will undoubtedly play a huge role in developing the urban and rural economy.
Extruded aluminum will be widely used in road and bridge repair in North America.

Research and development of aluminum bridge panel
Although aluminum has many advantages, it also faces many challenges. Pavyzdžiui, its elastic stiffness and fatigue strength are much lower than steel, the strength performance of solder joints and their heat-affected areas is greatly reduced, and the price of raw materials is also high.
In the face of these challenges, after years of research and development, madi group has designed and built hundreds of aluminum alloy bridge structures using fusion welding and selected alloys, which have been applied in practice to build new Bridges, repair and reinforce aging Bridges.
Among these structures, the famous one is the make-a-bridge, which is used in new pedestrian aluminum Bridges in the United States and Canada. Instead of welding, it is interlocked.
The group’s pedestrian aluminium bridge for the Asian market is calledCaribbean”.
Dabar, madi group has successfully built an aluminum bridge capable of handling 15 tons of cars.
Matty group, in collaboration with the university of Waterloo (Waterloo) research and development ofsafe aluminum bridge plate (GuarDeck) concept structure have been incorporated into the Canadian standards association (CSA) in 2011 file, later, they built a bridge test, 22.9 meters long, at Waterloo university conducted a series of comprehensive assessment test, such as ultimate strength test, life test, vibration test, fatigue test and so on.
The group’s in-house engineering team has built several prototype bridge panels and conducted extensive tests in the workshop, as well as friction tests with 178kN presses to assess the force of friction, under the auspices of the aluminum industry development center of Quebec (CQRDA), which is dedicated to developing new applications of aluminum.
The GuarDeck aluminum bridge is made of extruded aluminum and all parts are machined on a large 5-axis machining center (CNC) with high accuracy, with a deviation of less than 0.5 mm on the 11.5-meter-long panel.
All aluminum materials are produced by 50MN forward extruder, and the alloy is 6061-t6, which has higher strength performance and high corrosion resistance. There are tenons and grooves on both sides of each bridge plate, so as to interlink each other. Because the thermal expansion coefficient of 6061 alloy is 23.6×10-6/℃, twice as large as that of steel, this connection method can eliminate the thermal expansion difference.
The aluminum bridge can be treated with a variety of finishes: transparent paint, durable anodizing, baking coating, and even an anti-skid epoxy resin to prevent car tires from sliding on the surface.
For safety reasons, a safety barrier can be installed on the side of the panel.
Madi group is always concerned about environmental protection. The 6061 alloy used for GuarDeck aluminum bridge contains about 20% scrap aluminum. If such extruded aluminum cannot be purchased, renewable new energy will be used as much as possible in the processing and manufacturing of aluminum bridge.
Papildomai, the aluminum bridge can be 100 percent recycled and reused, with a loss of less than 2.5 percent during smelting.
Current is important to use fast comprehensive bridge structure (ABC, acceleratdbridgeconstruction) technology, the essence of the ABC technology, is in the factory will block, block with good aluminum bridge, and then transported to site assembly, it can be finished in does not affect traffic within the scheduled time of hoisting, if the bridge of long span bridge surface, bridge panel can be pre-loaded into small blocks of 55 kilogramas, the small piece of main girder of fixed on extrusion Ι, fasteners, stainless steel, and take measures for corrosion protection, prevent damage, guard against theft.
Each fastener is solid and requires 134kN torque to loosen the panel.
Because the installation of the bridge board does not need welding process and large equipment, the installation time can be compressed very short, even if the unskilled workers install a prefabricated bridge panel as long as 10 minučių, a 30 meter span of the bridge only about 1 day can be handed in.
The manufacturing, installation and use of the GuarDeck aluminum bridge of maddie group is in full compliance with environmental regulations and standards of relevant countries and organizations, such as the Canadian national standards, the Canadian standards institute (CSA), the American society of civil engineers (ASCE), and the interstate highway and transportation administrators association (AASHTO).
Backbone material of 6061 alloy bridge
In today’s aluminum bridge materials, daugiau nei 90% of them are 6061 alloy extruded materials, especially for highway aluminum Bridges, almost all of them are made of 6061 alloy extruded materials, and the auxiliary facilities of pedestrian Bridges can be made of 6063 alloy extruded materials.
Lydinys 6061 is an ai-mg-si-cu-cr alloy developed by Alcoa in 1933 and put into commercial production. It is a classic, time-tested deformed aluminum alloy and one of the four “deimantas” heat-treatable aluminum alloys.
(the fourking kongheat-treatable aluminum alloys include type 2024, tipo 6061, tipo 6063 and type 7075).
The output of type 6061 alloy is second only to that of type 6063 lydinio, and much more than that of type 2024 and type 7075 lydinio.
By December 2019, yra 5 members of the 6061 alloy family. Except for the 6061A developed by the European aluminum association (EAA), the other 4 are all American alloys. Their chemical composition is shown in table 1.
Only 6061 alloy is used in the production of bridge aluminum, because it has comprehensive properties and easy to control the composition. Some old aluminum can be used in the mixing.
The solid melting temperature of 6061 alloy is very wide and easy to control, ranging from 515℃ to 550℃, which can be controlled at 535℃.
Specification for artificial aging of extruded materials :(170 ~ 180)℃/8h.
The mechanical properties of 6061 alloy are shown in table 2, and the mechanical properties at low and high temperatures are shown in table 3.

Physical properties of 6061 lydinio: density 2.7g/cm3, liquidus temperature 652 ° c, solidus temperature 582 ° c, linear expansion coefficient 23.6×10-6/ c from 20 ° c to 100 ° c, specific heat 896J/(kilogramas. ° c) prie 20 ° c, thermal conductivity at 25 ° c:
O state of 180 w/(m ﹒ ℃), T4 status of 154 w/(m ﹒ ℃), T6 state of 167 w/(m ﹒ ℃), 20 ℃ when the electrical conductivity of: O state of 47% IAKS, T4 status of 40% IAKS, T6 state 43% IAKS, 20 ℃ when the resistivity, O n Ω ﹒ 37 m, state of 43 n Ω 40 n, m, T6 state Ω, m.
Corrosion resistance of 6061: the potential of SCE(saturated dry mercury electrode) in 2.67%AlCl3 solution was -876.9mV, and the pore erosion potential was -704.2mV.
No stress corrosion cracking was found in T6 material in the laboratory and in actual use. No stress corrosion cracking was found in T4 material in actual use. Tačiau, such corrosion was observed in the direction of plate thickness and peeling corrosion was observed in the laboratory test, but it had no effect on actual use.
The 6061 alloy has good welding properties and can also be brazed.
It is a kind of classic alloy which can be heat treated and strengthened with medium strength extrusion performance. It has excellent forming and processing performance and good surface treatment performance. It is widely used in general industrial structure and transportation equipment.
From the point of the development of aluminum alloy Bridges, the world’s first bridge is the Pittsburgh aluminum (Pittsburgh) Smithfield, Smithfield street is about 100 m long highway bridge with 2014 – T6 aluminum alloy thick plate, which was built in 1933, renovated in 1967, the bridge panel to switch to stronger corrosion resistance of 5456 – H321 alloy thick panel, it can be think that 1953 years ago, highway bridge aluminium alloy is mostly 2014 – T6 alloy,
In addition to 2014-t6 alloy plates, some 6151-t6 alloy thick plates were used for a road bridge built in Hendon, England in 1948.
Į 1950, a road bridge over the river Tummel in Scotland was built with 6151-t6 alloy sheet.
Some road Bridges built in Germany and England before 1962 (1953 ~ 1962) used 6351-t6 alloy extruded profile corrugated sheet.
Since the mid – 1990 – s, 6061 – T6 alloy aluminum extrusion materials in bridge structure material in the dominant, one of the famous Pennsylvania zhu (Juniata river suspension bridge, tower, built in 1994, using the Reynolds metals (after annexation by Alcoa, now Mr NingKe company) provided by 6061 – T6 and 6063 – T6 alloy extruded material, the road bridge is about 98 m long, a former steel bridge, only through 7 tons of cars, to aluminum bridge can pass 22 tons of cars.
It can now be said that before the emergence of aluminum alloy with better overall performance, it is advisable to consider the 6061-t6 alloy extruded material as aluminum bridge material.
Žinoma, toks kaip 6063, 5083, 5086, 6082 and so on can also be used.
Aluminum is after wood, steel, concrete, stone material of construction of the bridge, this paper introduces the aluminum bridge process and various properties of 6061 – T6 alloy, hope that interested in aluminum bridge and bridge aluminum people and promote the application of aluminum and help to the development of national economy, the more hope authorities understand madden group in aluminum bridge.
The author of the following views are purely a statement, not as a lesson.
The understanding of aluminum bridge needs to be strengthened, the investment needs to be increased, and the development should be accelerated.
Compared with the United States and Canada, China has little momentum in the construction of aluminum Bridges, with insufficient research, incomplete design specifications, and the aluminum industry’s work in this area to be strengthened.
In March 2007 was China’s first aluminum bridge built in hangzhou qingchun road pedestrian overpass in the river, technology and materials all imported from Germany, in 2007, nine months completely independent intellectual property rights of state-owned pedestrian overpass in Shanghai xujiahui cao caoxibei road operation, using 6061 – T6 alloy, single span 23 metrų, 6 metrų pločio, 2.6 meters high, the main clear height of 4.6 metrų, its own quality 15 tonų, about 50 tons load.
According to incomplete statistics, nuo 2007 į 2019, 13 metų, our country built in 15 cities such as Beijing, Shanghai, a total of about 75 pedestrian crossing aluminum bridge, highway Bridges thereof not see public reporting, therefore, in terms of aluminum bridge construction, the number is less than the industry developed countries, the road bridge is less, this is not surprising, because the United States has a history of aluminum bridge built in 87, and construction of the Chinese history of 13 metų, but other countries such as Canada, Britain, Vokietija, Denmark, Norway, Sweden and other countries of aluminium are around 80 history of bridge construction.
Some people think that the initial cost of aluminum is higher than that of steel. Economically speaking, the steel used to build a 50-meter-long pedestrian bridge is only about 40% of the price of aluminum. Tačiau, some people abroad have done research, and if the maintenance cost is included, the aluminum bridge is much more economical than the steel bridge.
Taking the manufacturing of a bridge deck of 91.4 meters long and 6.1 meters wide as an example, the manufacturing cost of steel bridge deck is 833 dollars/meter 2, and that of aluminum bridge deck is 1,388 dollars/meter 2, so the total cost of steel bridge deck is 450,000 dolerių, and that of aluminum bridge deck is 750,000 dolerių, and that of aluminum bridge deck is 67% more expensive than that of steel bridge deck.
The steel deck has to be maintained every 10 metų, which is a labor-intensive job to clean up the rust, expose the steel and repaint it with preservatives.
If the life cycle of the bridge is 50 metų, it needs to be maintained four times, and the cost of each time is about 1/3 of the initial construction cost.
In this calculation, the total cost of the steel bridge is $1.05 million over the lifetime of the bridge, while the aluminum bridge remains beautiful and beautiful after 50 years of service, even after 25 years of service, and the cost remains at $750,000.
Tokiu būdu, even if it is purely economic, there are advantages to building aluminum Bridges.
Establish a research and development center to promote the application of bridge aluminum.
The reason why China has not become a leader in aluminum bridge construction is related to the fact that it has not built a powerful research and development unit.
In order to promote the development and research and development of aluminum bridge bridge performance more aluminum alloy, the development of efficient aluminum bridge processing technology and assembly process, it is necessary for us to form a powerful research institute and center of aluminum bridge, increasing investment, talents, and make the bridge aluminum become a new bright spot of aluminium industry, under thehardkung fu dry, get dry, dry for five or six years later, carrying a banner, one of the leading enterprises in the world’s aluminum bridge team.

Komentarai (50)

  1. Niamh
    Spalio mėn 08, 2020 prie 8:13 pm

    Hі tһere, i read your bloɡ occasionallү and i oԝn a simiⅼaг one
    and i was just curious if you get a lot of spam feedback?

    Jei taip, kaip jį sumažinti, bet kokį įskiepį ar ką nors, ką galite patarti?

    I get so much latelʏ it’s driving me crazy
    so any assistance is very much appreϲiated.

    Нere is my blog noah

  2. Jaimie
    Jan 31, 2021 prie 7:03 pm

    Parašykite daugiau, tai viskas, ką turiu pasakyti. Pažodžiui, it seems as
    though you relied on the video to make your point. You obviously know what
    youre talking about, why throw away your intelligence on just posting videos to your weblog when you could be giving us something informative to read?

    Take a look at my webpage Pigūs skrydžiai

  3. Nora
    Jan 31, 2021 prie 10:25 pm

    Jūsų stilius yra toks unikalus, palyginti su kitais žmonėmis, iš kurių skaičiau medžiagą.

    Dėkoju už tai, kad paskelbėte, kai turite galimybę, Guess I’ll just bookmark this site.

    Taip pat apsilankykite mano puslapyje – Pigūs skrydžiai

  4. Margarito
    Vasario mėn 01, 2021 prie 8:04 esu

    Right now it sounds like Movable Type is the best blogging platform
    out there right now. (iš to, ką skaičiau) Is that what
    you’re using on your blog?

    Čia yra mano svetainė; Pigūs skrydžiai

  5. Trevoras
    Vasario mėn 01, 2021 prie 2:48 pm

    Gražus įrašas. I used to be checking continuously this
    blog and I am inspired! Extremely useful info particularly the remaining
    phase 🙂 I maintain such info much. I was looking for this particular info for a long
    laikas. Aciu ir sekmes.

    Take a look at my web site: Pigūs skrydžiai

  6. Dena
    Vasario mėn 01, 2021 prie 11:14 pm

    O Dieve mano! Impressive article dude! Didelis ačiū, However I
    am going through difficulties with your RSS.

    I don’t know the reason why I cannot subscribe to it.

    Is there anyone else getting identical RSS problems? Anyone who knows the solution will you
    kindly respond? Dėkoju!!

    Pažvelkite į mano svetainę; Pigūs skrydžiai

  7. Benny
    Vasario mėn 02, 2021 prie 6:05 esu

    Sveiki, Tvarkingas postas. There’s a problem along with your site in internet explorer,
    could check this? IE nonetheless is the market leader and a good component to people will leave out your magnificent
    writing due to this problem.

    Nesivaržykite naršyti mano tinklaraštyje; Pigūs skrydžiai

  8. Suzanne
    Vasario mėn 02, 2021 prie 6:16 pm

    Gražus įrašas. I was checking constantly this blog and I am inspired!
    Very useful information particularly the closing part 🙂 I care for such information much.
    Aš labai ilgai ieškojau šios tam tikros informacijos.
    Ačiū ir sėkmės.

    Stop by my page: Pigūs skrydžiai

  9. Marianne
    Vasario mėn 02, 2021 prie 6:25 pm

    Geras įrašas. I learn something totally new and challenging on sites I stumbleupon on a daily basis.
    It will always be helpful to read articles from other writers and use a little something from their sites.

    Mano puslapis :: Pigūs skrydžiai;,

  10. Tamara
    Vasario mėn 03, 2021 prie 4:10 pm

    Hey I know this is off topic but I was wondering if
    you knew of any widgets I could add to my blog that
    automatically tweet my newest twitter updates.
    I’ve been looking for a plug-in like this for quite some time
    and was hoping maybe you would have some experience with something like this.

    Please let me know if you run into anything. I truly enjoy reading your
    blog and I look forward to your new updates.

    my homepage cheap flights (

  11. chemdog
    Vasario mėn 12, 2021 prie 4:52 esu

    There are four things every person has more of than they know sins debt years and foes.

  12. ptsd
    Vasario mėn 12, 2021 prie 9:10 esu
  13. cbd
    Vasario mėn 12, 2021 prie 10:20 esu
  14. Latrice
    Vasario mėn 12, 2021 prie 1:10 pm

    Thanks for a marvelous posting! I seriously enjoyed reading it, you happen to be a great author.

    I will ensure that I bookmark your blog and may come
    back in the foreseeable future. I want to encourage continue your great writing, have a nice day!

    Nesivaržykite naršyti mano tinklaraščio įraše … Pigūs skrydžiai (

  15. dumpster rental near me
    Vasario mėn 14, 2021 prie 10:00 esu

    Footprints on the sands of time are not made by sitting down.

  16. Marcospaulp
    Kovas 05, 2021 prie 1:33 pm

    tadalafilio vartojimas kasdien: tadalafilis 40 mg per parą

  17. WesleyTob
    Kovas 05, 2021 prie 7:10 pm

    didžiausia tadalafilio dozė tadalafilis 40
    tadalafilio gelis

  18. WesleyTob
    Kovas 06, 2021 prie 9:13 esu

    tadalafilis internete bendrinis tadalafilis 40 mg
    tadalafilis 60 mg pardavimui

  19. Randyguake
    Kovas 08, 2021 prie 5:07 pm

    sildenafilio be recepto bendrosios tabletės red

  20. MichaelasArownas
    Kovas 08, 2021 prie 5:38 pm

    pirkti receptinius vaistus internetu be: receptinių vaistų internete be gydytojo

  21. MichaelasArownas
    Kovas 09, 2021 prie 6:08 pm

    geriausios internetinės tarptautinės vaistinės Indija: pirkti vaistus be rx

  22. Randyguake
    Kovas 10, 2021 prie 12:53 esu

    generiniai vaistai be gydytojo recepto pigus tadalafilis

  23. Clyde
    Kovas 10, 2021 prie 3:53 pm

    I do trust all the ideas you’ve offered for your post. They’re really convincing and will definitely work.
    Vis tiek, the posts are too brief for starters. May you please extend them a
    little from subsequent time? Ačiū už įrašą.

    Taip pat apsilankykite mano svetainėje – interneto priegloba

  24. MichaelasArownas
    Kovas 10, 2021 prie 5:04 pm

    bendrosios tabletės red vaistai be gydytojo recepto

  25. MichaelasArownas
    Kovas 11, 2021 prie 11:26 esu

    generiniai vaistai be gydytojo recepto: pirkti receptinius vaistus

  26. Džefreimas
    Kovas 11, 2021 prie 5:57 pm

    viagros nuolaida be recepto viagra
    pirkti viagrą internetu kanadoje

  27. WayneVes
    Kovas 11, 2021 prie 6:07 pm

    viagrą iš Kanados viagrą be recepto walmart
    viagra online usa

  28. WayneVes
    Kovas 12, 2021 prie 12:54 esu

    pigi viagra internetu viagrą iš Kanados
    internetinis gydytojo receptas viagrai

  29. Džefreimas
    Kovas 12, 2021 prie 4:36 pm

    kada viagros bus generines kur nusipirkti viagros
    meksikietiška viagra

  30. WayneVes
    Kovas 12, 2021 prie 4:39 pm

    viagra amazon kada viagros bus generines
    viagra be gydytojo recepto usa

  31. WayneVes
    Kovas 12, 2021 prie 11:04 pm

    be recepto viagra 100mg viagrą
    viagra be gydytojo recepto usa

  32. WayneVes
    Kovas 13, 2021 prie 3:14 pm

    viagra online usa meksikietiška viagra
    viagra 100mg kaina

  33. Džefreimas
    Kovas 13, 2021 prie 3:17 pm

    viagrą iš Indijos viagra be gydytojo recepto usa
    internetinis gydytojo receptas viagrai

  34. WayneVes
    Kovas 13, 2021 prie 9:36 pm

    pirkti tikrą viagrą internete kada viagros bus generines
    viagra 100mg kaina

  35. WayneVes
    Kovas 14, 2021 prie 1:08 pm

    viagra be gydytojo recepto kiek yra viagros
    kur nusipirkti viagros internetu

  36. Džefreimas
    Kovas 14, 2021 prie 1:13 pm

    kur nusipirkti viagros internetu viagros kaina
    viagrą be recepto

  37. Napoleon
    Kovas 15, 2021 prie 9:31 esu

    Pretty great post. I just stumbled upon your blog and wanted to say that I have really loved surfing
    around your weblog posts. After all I’ll be subscribing on your rss feed and I’m hoping you write once more very soon! žaidimai ps4 allenferguson žaidimai ps4

    Mano tinklaraštis; žaidimų

  38. WayneVes
    Kovas 15, 2021 prie 11:21 esu
  39. Džefreimas
    Kovas 15, 2021 prie 11:40 esu

    viagra be gydytojo recepto pirkti viagra online usa
    pirkti viagrą internetu

  40. WayneVes
    Kovas 15, 2021 prie 6:07 pm

    kada viagros bus generines viagros kaina
    п »їviagra tabletes

  41. Sherry
    Kovas 16, 2021 prie 7:12 esu

    Thank you for sharing your info. I truly appreciate your efforts and I am waiting for your further write ups
    thanks once again. ps4 zaidimai 185413490784 ps4

    mano tinklalapis: Kokosų aliejus

  42. Gegužė 31, 2021 prie 8:53 pm

    big people dating sites free

  43. Jun 01, 2021 prie 10:20 pm

    dating agencies free

  44. Jun 02, 2021 prie 2:25 esu

    men date for free dating site

  45. Jun 02, 2021 prie 3:06 esu

    free speed dating in florida

  46. Jun 02, 2021 prie 10:28 esu

    polyamory married and dating free online

  47. Jun 24, 2021 prie 12:07 esu

    free black people dating websites

  48. Jun 24, 2021 prie 5:12 esu

    newest free dating sites

  49. Jun 24, 2021 prie 5:39 esu

    looking for a free dating site

  50. Jun 24, 2021 prie 9:09 esu

    free dating sites that don t require a credit card

Palikite komentarą