アルミ缶飲料包装金属容器

アルミ缶飲料包装金属容器

今日では, アルミ缶, 飲料包装金属容器, の歴史があります 61 年, 非常に成熟した生産技術で. 暑い日, ビールや炭酸飲料を飲み込んだとき, カラフルなアルミ缶には加工の隙間がないことに気付くでしょう! はい, これは、優れたスタンピング性能と延性を備えたアルミ缶合金によるものです。, which can well adapt to the high-speed stamping of the can body punch machine, so form a seamless can body! 加えて, the excellent ductility also enables the aluminum can lid to be firmly crimped and connected with can body, perfectly sealing the drink! While we were surprised by the perfect characteristics of aluminum alloy for aluminum cans, 実際には, the commonly used aluminum alloy coil for cans, with 9 tons weighs and 1.5 幅メートル, 生産することができます 750,000 缶 ! And This is so efficient !

Specific Aluminum Cans Alloy and Corresponding Application

現在, がある 1100, 1050, 3003, 3004, 3005, 3104, 3105, 5005, 5052, 5182, 5754 そして 5454 アルミ缶の全体的な製造に使用されるアルミ缶合金グレード. その中で, 最も一般的に使用されるのは3104-h19です, 5182 h19, および5052-h19アルミ缶合金. The specific corresponding applications are as follows:

3004、3104 Aluminum Coil for Can Body

3004、3104 aluminum alloy coil are the two main alloys used in can body. その中で, 3104 aluminum sheet /coil tensile strength ≥275Mpa, the elongation is up to 20%, and the earing ratio(E)≤4%. Like the 3004 aluminum cans alloy, it belongs to Al-Mn alloy. The addition of main alloy element Mn, not only improves the mechanical properties, but also doesn’t reduce the corrosion resistance of the alloy. The most representative 3104-h19 aluminum coil for can body, has excellent deep impact and strong corrosion resistance. and The inner and outer walls of the aluminum can don’t need pretreatment, the plain aluminum coating/oil can play an excellent oxidation and corrosion resistance. その上, 3004、3104 aluminum cans alloy all can be well used for thinning and stretching, with low earing ratio, 優れた印刷効果, reduced material consumption and reduced batch purchase cost.

5052、5182 Aluminum Cans Alloy for Lids

For beverage aluminum lids with the largest demand, including beer and carbonated beverages such as carbonated acid and alkali, 5182 h19 aluminum alloy was the most used, with common specifications of 0.249*827.89mm, 0.27*946.5んん, 0.22*911んん,等. And for 5052-h19 aluminum cans alloy, was used for mixed congee and other non-vapor food aluminum lids, with common specifications of 0.25*803mm and 0.25*721.8mm,等. 最も注目すべきは, Mingtai Al. has the mature aluminum cans alloy for lids production technology, which can ensure the 5052, 5182 aluminum alloy sheet version of the flat, excellent processing performance, and provide the original warranty!

5182 Aluminum Cans Alloy for Ring Pull of Cans

加えて, 5182 aluminum cans alloy is also the most representative material for ring pull manufacturing. 5182 アルミシート belongs to 5 series Al-Mg antirust alloy, and its main composition Mg content can reach 4% 〜 5%. そう, 5182 h19 aluminum sheet for ring pull has excellent corrosion resistance and processability, with a common thickness of 0.279–0.406んん. ここに, Mingtai Al. introduces advanced grinding equipment to ensure the flatness of the sheet and the thickness tolerance of ± 0.005mm!

Technical Parameters

Typical Alloy タイプ 気性 Thickness(mm) Width(mm) Length(mm) Usages
3004 Sheet/ Plate/ Coil F,THE,H12,H14,H16,H18,H19,H22,H24,H26,H28,H112,H114 0.1-500 100-2650 NS Can body (Beer/ beverage/ soda …)
3104 F,THE,H12,H14,H16,H18,H19,H22,H24,H26,H28,H111,H112,H114 0.1-500 100-2650 NS Can body (Beer/ beverage/ soda …)
5052 F,THE,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114 0.1-600 20-2650 NS Lids
5182 F.O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114,H116,H321 0.15-600 20-2650 NS Lids/ Ring pull of cans